Update on the PS3 Hyperdrive
Team Xecuter has posted an update with regard to their PS3 Hyperdrive. The design is finished; however, there’s no mention of a scheduled release date yet. Looking at the image below, I truly hope this doesn’t prevent you from standing the PS3 vertically…
The PS3 Hyperdrive is aimed towards maximizing your storage capacity and minimizing your hard drive costs. Cool concept.
It features:
1. Supports 2.5″ and 3.5″ SATA HDD (Also working on built in IDE support)
2. Switch for SATA HDD (2.5″/3.5″) w/ LED
3. Switch for select output interface for PC (SATA or USB) w/ LED
4. Special SATA female(Hyperdrive) to Male(PS3) connecter with custom plug-lock design, easy install and just plug and lock.
5. Release lock button for disconnecting Hyperdrive with PS3
6. Molex power source input.
7. Easy to install HDD inside the HyperDrive.
8. Built-in cooling fan.
---------------------------------------------------------------------
PS2 Backups on the PS3!
Here is a video demonstrating the possibility of booting PS2 backups on the PS3 running firmware 1.10 with SwapMagic 3.6. Its been confirmed this method does not work on the latest 1.31 update.
First take the torx bolt out slide the face plate off and remove few phillips screws. Take the metal cover off the top of the bd drive. Then remove the top plastic cover and unplug the sensor. Secure it down with a couple screws. Then cut a circle (with a plastic cutting saw bit) on the top cover. Your face plate now slides back over to allow swapping and still keeping the PS3 looking clean.
Boot the PS2 DVD and wait for it to load. Now hold the PS button and quit the game. Slide your cover back and push down on the disk secure magnet. It will stop the laser, but not the spinning. swap disks and press circle(jp) X to boot your backup.
Swapmagic is only needed for PAL conversion and CD backups.
---------------------------------------------------------------------------
این هم قیمت PS3 در Best Buy
Team Xecuter has posted an update with regard to their PS3 Hyperdrive. The design is finished; however, there’s no mention of a scheduled release date yet. Looking at the image below, I truly hope this doesn’t prevent you from standing the PS3 vertically…
The PS3 Hyperdrive is aimed towards maximizing your storage capacity and minimizing your hard drive costs. Cool concept.
It features:
1. Supports 2.5″ and 3.5″ SATA HDD (Also working on built in IDE support)
2. Switch for SATA HDD (2.5″/3.5″) w/ LED
3. Switch for select output interface for PC (SATA or USB) w/ LED
4. Special SATA female(Hyperdrive) to Male(PS3) connecter with custom plug-lock design, easy install and just plug and lock.
5. Release lock button for disconnecting Hyperdrive with PS3
6. Molex power source input.
7. Easy to install HDD inside the HyperDrive.
8. Built-in cooling fan.
---------------------------------------------------------------------
PS2 Backups on the PS3!
Here is a video demonstrating the possibility of booting PS2 backups on the PS3 running firmware 1.10 with SwapMagic 3.6. Its been confirmed this method does not work on the latest 1.31 update.
First take the torx bolt out slide the face plate off and remove few phillips screws. Take the metal cover off the top of the bd drive. Then remove the top plastic cover and unplug the sensor. Secure it down with a couple screws. Then cut a circle (with a plastic cutting saw bit) on the top cover. Your face plate now slides back over to allow swapping and still keeping the PS3 looking clean.
Boot the PS2 DVD and wait for it to load. Now hold the PS button and quit the game. Slide your cover back and push down on the disk secure magnet. It will stop the laser, but not the spinning. swap disks and press circle(jp) X to boot your backup.
Swapmagic is only needed for PAL conversion and CD backups.
---------------------------------------------------------------------------
این هم قیمت PS3 در Best Buy