قسمت های قرمز رنگ خیلی واضح طریقه ریختن و تنظیمات wii پس از ریختن سیو رو به سادگی بیان کرده... :
توجه: به فرم ویر دستگاه حتما توجه کنید که ممکن است برای دستگاتون( مربوط به کپی خور یا نبودن) آن مشکل ایجاد کند!
مراحل و موارد مورد نیاز جهت استفاده و ریختن سیو بازی ها در وی! :
یک کارت Step 1 - SD
Make sure that you have an SD Card which is used to transport the save from the wii. you could get a 2G SD Card off the net or in a local gaming store.
فرم ویر دستگاه- Step 2
You need to have at least firmware 2.1 or up, this is only because SD Card compatibility was added on 2.1 and up
سیو و کد بازی -Step 3
You need to have the correct game code, you can find a list of all most every game code here!
در این جا منظور همان سیو هایی است که براتون در پست قبل قرار دادم...!
Just look through and find the game of your choice. after you have found it look to the right of it and it will have a 3 Digit Code. But there is 4 digits to every code.
ریجن بازی...- Step 4
The 4th digit is the Region Identifier. It is used to tell what region your Game and Saves are. Here are the 3 Region Identifiers
پالP - PAL
ژاپنJ - JAPAN
آمــریکاU - USA
To find what region your game is try look on the Cover-Back-Booklet of the game for it. Now that you know the Game Code it is time to find a save that is the Region as your game.
پیدا کردن سیو که براتون انجام دادم- Part 5
تغییرات و تنظیمات کارت اس دی- Part 6
Now that you have the save data you want you will have to set up your SD to the following
SD/private/wii/title/(GAMECODE WITH REGION IDENTIFIER AT THE END)
For those who dont understand that means open your sd card and add an file called priavte and in that make on called wii and so on.
If you have the Gamecode with the identifier it should look something like
RMCP - That is the Mario Kart Wii Game Code with the PAL Region Identifier added. Make sure that you add your region identifier to it.
or
SD/private/wii/title/RMCP
وارد کردن و ریحتن سیو- Part 7
Now that you have your SD set up, remember the folder you made with the code and region identifier? well open that it should be at
SD/private/wii/title/(GAMECODE WITH REGION IDENTIFIER AT THE END) <== This File, Drag and drop the downloaded save that you downloaded before into that folder.
وارد کردن کد و سیو در خود دستگاه وی!- Part 8
Now plug your SD into your wii and load the menu up. click on settings on the buttom left side of the screen and click Data Management. Then click on save data and wii data and it should open up a screen with all your saves. if you go to the top right of the screen and click on the SD Card, it will open the saves on it. now just click it and copy it over. make sure you delete the save off the wii before copying the new one or it will say that it already excists on the wii system.
Congratsulation on adding a new wii save data to your wii, i hope this guide helped you
Need more help? reply here and me or some other nice person would gladly help you!
توجه:فقط اگر در کپی کردن فایل های بازی مشکل پیدا کردید به ترتیب کارهای زیر را انجام دهید...:
[How-To] !
- Gamesaves that aren't copyable are now able to be copied.
- Games like Pokemon, Mario Kart, others.
Materials Needed:
- Saved Game Extrator
- SD Card
- The game that you will copy the saved game from.
- Twilight Hack
(Make sure you have the files of the Twilight Hack first)
Step 1. Download Save Extractor
Step 2. Rename the .elf file to boot.elf
Step 3. Put the boot.elf file into the root of your SD.
Step 4. Now put the SD card into the Wii.
Step 5. Load the Twilight Hack.
Step 6. Insert the game disc with the saved game.
Step 7. Push the RESET button.
Step 8. You now have the saved game in your SD Card.
[How-To] Install The Non-Copyable Games!
- Install Gamesaves that aren't copyable.
- Games like Pokemon, Mario Kart, others.
Materials Needed:
- Saved Game Installer
- SD Card
- The game that you want the saved data from.
- Twilight Hack
(Make sure you have the files of the Twilight Hack first)
Step 1. Download Save Installer
Step 2. Rename the .elf file to boot.elf
Step 3. Put the boot.elf file into the root of your SD.
Step 4. Now put the SD card into the Wii.
Step 5. Load the Twilight Hack.
Step 6. Insert the game disc that needs the saved game.
Step 7. Push the RESET button.
Step 8. You now have the saved game.
Oh and if anyones got PKMN:BR saved game with almsot all the pokemon please post it D
دانلود در صورت نیاز:
File:Savegame-Extractor v2.0.zip - WiiBrew
File:Savegame-Installer v2.0.zip - WiiBrew
برداشت و جمع آوری از وی سیو!