کسی نمی دونه؟اگه درست نشه واقعا بدبخت می شم.
To resolve these issues, follow these steps.
Note You can run the commands in the following procedure by using the command prompt. If you run these commands in Windows Vista, run them at a command prompt that has elevated user rights. To do this, click Start, click Accessories, right-click the command-prompt shortcut, and then click Run as Administrator.
1. Use Bootsect.exe to restore the Windows Vista MBR and the boot code that transfers control to the Windows Boot Manager program. To do this, type the following command at a command prompt: Drive:\boot\Bootsect.exe /NT60 All
In this command, Drive is the drive where the Windows Vista installation media is located.
Note The boot folder for this step is on the DVD drive.
2. Use Bcdedit.exe to manually create an entry in the BCD Boot.ini file for the earlier version of the Windows operating system. To do this, type the following commands at a command prompt.
Note In these commands, Drive is the drive where Windows Vista is installed.
• Drive:\Windows\system32\Bcdedit /create {ntldr} /d "Description for earlier Windows version"
Note In this command, Description for earlier Windows version can be any text that you want. For example, Description for earlier Windows version can be "Windows XP" or "Windows Server 2003".
• Drive:\Windows\system32\Bcdedit /set {ntldr} device partition=x:
Note In this command, x: is the drive letter for the active partition.
• Drive:\Windows\system32\Bcdedit /set {ntldr} path \ntldr
• Drive:\Windows\system32\Bcdedit /displayorder {ntldr} /addlast
3. Restart the computer.
راهش اینه
فقط شرمنده که وقت ندارم برات بنویسم، برای همین فعلاً راهش رو به لاتین کپی کردم برات فعلاً
اینم لینک اصلیش:
http://support.microsoft.com/kb/919529
اگر مشکلت رفع شد که هیچ
اگر نتونستی با این کار کنی بگو تا برات توضیح بدم
-----
ویرایش:
------------
مرحله ی اول: DVD ـی ویندوز ویستا رو در درایور DVD قرار بده (اسم این درایو رو من توی دستور پایین میزارم
Z، شما بجای این
Z پسوند درایور DVD خودت رو بزار)
توی Command Prompt (توی Run تایپ کن cmd تا این صفحه باز بشه) تایپ کن:
[LTR]Z:\boot\Bootsect.exe /NT60 All[/LTR]
مرحله ی دوم: حالا باید از BCDEdit.exe برای ساختن بوت استفاده کنی
در فرامین زیر شما باید نام درایوی که در اون ویندوز ویستا نصب داری رو بزاری (من بطور فرضی میزارم
Y، شما بجای این
Y اسم درایو ویستای خودت رو بزار)
فرامین زیر رو یکی یکی و به ترتیب در Command Prompt تایپ کن و اینتر رو بزن تا اجرا بشه فرمان:
[LTR]Y:\Windows\system32\Bcdedit /create {ntldr} /d "Microsoft Windows XP"[/LTR]
[LTR]Y:\Windows\system32\Bcdedit /set {ntldr} device partition=X:
[/LTR]
نکته: این
X که اینجا نوشتم، پسوند اون پارتیشنیه که ویندوز XP شما در اون فعاله (همین ویندوزی که الان درش هستی)
[LTR]Y:\Windows\system32\Bcdedit /set {ntldr} path \ntldr[/LTR]
[LTR]Y:\Windows\system32\Bcdedit /displayorder {ntldr} /addlast[/LTR]
مرحله ی سوم: سیستم رو Restart کن تا دوباره صفحه ی بوت ویستا رو ببینی
پ.ن: می تونی این فرامین رو توی خود Run مستقیماً Copy / Paste کنی و بعد اجرا کنی (فقط یادت نره اون X و Y و Z رو جایگزین کنی)